Dell Inspiron 3500 - Manual (Page 79)

Removing and Replacing Parts 4-43
6SHDNHUV
To remove the speakers, see Figure 4-16 and follow these steps:
1. Remove the display assembly.
2. Remove the keyboard.
3. Remove the palmrest assembly.
4. Remove the system board rails.
5. Remove the DC/DC board.
6. Disconnect the left speaker cable from connector J13 on the system
board.
7. Disconnect the right speaker cable from connector J15 on the system
board.
8. Lift the speakers and cables out of the bottom plastic.
NOTE: The left and right speakers are interchangeable. Note the routing of the
speaker cables through the plastic routing ribs for installation.