Dell Inspiron 3500 - Manual (Page 68)

4-32 Dell Inspiron 3500 Portable Computer Service Manual
,QIUDUHG%RDUG
The infrared (IR) board can be removed without removing the palmrest. To
remove the infrared board, see Figure 4-16 and follow these steps:
1. Remove the display assembly.
2. Remove the 5-mm screw securing the IR board to the right system board
rail.
3. Lift the IR board to expose the wires. Disconnect the IR cable from con-
nector J4 on the system board.
4. Remove the IR board.
NOTE: Reconnect the IR board to the system board by carefully threading the
wires and connector by the I/O bracket and using a screwdriver to press on the
connector to reseat it.
7\SH RI 6FUHZ 7RUTXH
FPH 2.5 x 5 (1) 3.0–3.5 kgf-cm