Dell Inspiron 3500 - Manual (Page 61)

Removing and Replacing Parts 4-25
/&'3DQHODQG(0,3DQIRU,QFK'LVSOD\
$VVHPEO\
&$87,21 7KH IROORZLQJ SURFHGXUH VKRXOG EH SHUIRUPHG RQO\ E\
GHSRW UHSDLU WHFKQLFLDQV
To remove the LCD panel from the EMI pan, see Figure 4-14 and follow these
steps:
1. Remove the display assembly.
2. Remove the bezel.
3. Remove the LCD interior assembly.
4. Remove the panel rails.
5. Remove (and save for installation) the Kapton tape from the lower right cor-
ner of the LCD interior assembly.
NOTE: When removing the EMI tape, hold each end of the tape at all
times. If one end is released, the tape will curl and stick to itself.
6. Remove (and save for installation) the EMI tape from the side and the bot-
tom of the LCD interior assembly.
7. Remove (and save for installation) any other Kapton or EMI tape securing
the LCD cable to the EMI pan.
8. Lift the LCD panel out of the EMI pan. The LCD FPC cable remains inside
the EMI pan, held in place by Kapton tape.