Dell Inspiron 3500 - Manual (Page 78)

4-42 Dell Inspiron 3500 Portable Computer Service Manual
'&'&%RDUG
To remove the DC/DC board, see Figure 4-16 and follow these steps:
1. Remove the display assembly.
2. Remove the keyboard.
3. Remove the palmrest assembly.
4. Remove the system board rails.
5. Remove the 14-mm screw.
6. Gently lift the DC/DC board off of the connector on the system board.
When installing the board, put pressure only on the areas where the connec-
tors on the DC/DC board and on the system board fit together. Pressing on
other areas may flex the board and break connections.
7\SH RI 6FUHZ 7RUTXH
FPH 2.5 x 14 (1) 3.0–3.5 kgf-cm