Lvds board, Lvds board -33, 9'6%rdug – Dell Inspiron 3500 User Manual
Page 69
Removing and Replacing Parts
4-33
/9'6%RDUG
The LVDS board can be removed without removing the palmrest. To remove
the LVDS board, see Figure 4-16 and follow these steps:
1.
Remove the display assembly.
2. Remove the keyboard.
3. Carefully lift the LVDS board off of connectors J2 and J3 on the video
board. The board is surrounded by an EMI fence.
NOTE: For grounding purposes, there may be EMI tape running from the LVDS
board to the I/O bracket. Note the placement of the tape and, during installa-
tion, replace it in the same position.
When installing the LVDS board, put pressure only on the areas where the con-
nectors on the LVDS board and on the video board fit together. Pressing on
other areas may flex the board and break connections.
NOTE: The LVDS board is unique for each type of LCD panel. During installa-
tion, make sure that the LVDS board is the correct one for the panel and that
any EMI tape attached to the board is replaced in its original position.