Dell PowerEdge R310 - Manual (Page 102)

102
Installing System Components
Figure 3-13. Installing and Removing the Cooling Shroud
Installing the Cooling Shroud
1 Orient the cooling shroud with the numbered fan bays as a guide.
2 Align the cooling shroud posts with the slots on the system board.
3 Push the cooling shroud down until all edges are secured to the system
board.
4 Close the system. See "Opening and Closing the System" on page 78.
1 power distribution board shroud 2 system board shroud
3 tabs (2) 4 fan bay numbers
1
2
3
4
R310HOM.book Page 102 Thursday, March 4, 2010 1:03 AM