Installing a cooling fan, D. see figure 3-16, See figure 3-16 – Dell PowerEdge R310 User Manual
Page 113
Advertising
Installing System Components
113
Figure 3-16.
Removing and Installing a Fan
Installing a Cooling Fan
1 Ensure that the fan is oriented correctly.
Orient the fan module so that the side with the power cable faces toward the
back of the system.
2 Lower the fan into the fan assembly until the fan is fully seated.
See Figure 3-16.
3 Connect the fan’s power cable to the power connector on the system board.
4 Replace the cooling shroud or power distribution board shroud as applicable.
See "Installing the Cooling Shroud" on page 102.
1
fan
2
power cable
1
2
R310HOM.book Page 113 Thursday, March 4, 2010 1:03 AM
Advertising