Vflash media (optional), Installing a vflash media card, Removing a vflash media card – Dell PowerEdge R310 User Manual

Page 120: Processor, Removing a processor

Advertising
background image

120

Installing System Components

VFlash Media (Optional)

The VFlash media card is a Secure Digital (SD) card that plugs into the
optional iDRAC6 Enterprise card at the back corner of the system.

Installing a VFlash Media Card

1 Locate the VFlash media slot at the back corner of the system.
2 With the label side facing up, insert the contact-pin end of the SD card

into the card slot on the module.

NOTE:

The slot is keyed to ensure correct insertion of the card.

3 Press inward on the card to lock it into the slot.

Removing a VFlash Media Card

To remove the VFlash media card, push inward on the card to release it, and
pull the card from the card slot.

Processor

Removing a Processor

CAUTION:

Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.

1 Prior to upgrading your system, download the latest system BIOS version

on support.dell.com.

2 Turn off the system, including any attached peripherals, and disconnect

the system from the electrical outlet.

3 Open the system. See "Opening the System" on page 78.
4 Remove the cooling shroud. See "Removing the Cooling Shroud" on

page 101.

R310HOM.book Page 120 Thursday, March 4, 2010 1:03 AM

Advertising