Jumpers and connectors, System board jumpers – Dell PowerEdge R310 User Manual

Page 165

Advertising
background image

Jumpers and Connectors

165

Jumpers and Connectors

This section provides specific information about the system jumpers. It also
provides some basic information on jumpers and switches and describes the
connectors on the system board.

System Board Jumpers

Figure 6-1

shows the location of the configuration jumpers on the system

board. Table 6-1 lists the jumper settings.

Table 6-1.

System Board Jumper Settings

Jumper

Setting

Description

PWRD_EN

(default) The password feature is enabled

(pins 2–4)

The password feature is disabled
(pins 4–6)

NVRAM_CLR

(default) The configuration settings are retained at

system boot (pins 3–5)

The configuration settings are cleared at the
next system boot (pins 1–3)

R310HOM.book Page 165 Thursday, March 4, 2010 1:03 AM

Advertising