Dell PowerEdge R310 User Manual

Page 28

Advertising
background image

28

About Your System

E1410

Internal Error

detected.

Check "FRU X".

Specified processor has an
internal error. The error
may or may not have been
caused by the processor.

Remove AC power to the
system for 10 seconds and
restart the system.

If the problem persists,
see "Getting Help" on
page 169.

E1414

CPU # temp

exceeding

range. Check

CPU heatsink.

Specified processor is out
of acceptable temperature
range.

Ensure that the processor
heat sink is properly
installed. See
"Troubleshooting the
Processor" on page 160
and "Troubleshooting
System Cooling
Problems" on page 151.

E1418

CPU # not

detected.

Check CPU is

seated

properly.

Specified processor is
missing or bad, and the
system is in an
unsupported
configuration.

Ensure that the specified
microprocessor is
properly installed. See
"Troubleshooting the
Processor" on page 160.

E141C

Unsupported

CPU

configuration.

Check CPU or

BIOS revision.

Processor is in an
unsupported
configuration.

Ensure that your
processor matches and
conforms to the type
described in the processor
technical specifications
outlined in your system’s
Getting Started Guide.

E141F

CPU # protocol

error. Power

cycle AC.

The system BIOS
has reported a processor
protocol error.

Remove AC power to the
system for 10 seconds and
restart the system.

If the problem persists,
see "Getting Help" on
page 169.

Table 1-2.

LCD Status Messages (Optional) (continued)

Code

Text

Causes

Corrective Actions

R310HOM.book Page 28 Thursday, March 4, 2010 1:03 AM

Advertising