Straight up to clear the chassis. see figure 3-24, Latches on the riser the engage. see figure 3-24 – Dell PowerVault DL2100 User Manual
Page 120
Advertising
120
Installing System Components
Figure 3-24.
Removing and Replacing Expansion-Card Riser 2
Removing Expansion-Card Riser 2 From the Expansion-Card Bracket
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2 Open the system. See "Opening the System."
3 Remove any expansion cards from the expansion-card riser 2. See
4 Remove expansion-card riser 2. See "Removing Expansion-Card Riser 2."
1
expansion-card riser 2
2
release latch
3
pin collars (2)
4
mounting pins (2)
5
riser 2 connector on system board
1
3
2
4
5
Advertising