Installing the cooling shroud – Dell PowerVault DL2100 User Manual
Page 98
Advertising
98
Installing System Components
Figure 3-13.
Removing and Installing the Cooling Shroud
Installing the Cooling Shroud
1 Align the tabs on the right side of the cooling shroud with the cutouts in
the right chassis wall.
2 Lower the right end of the shroud into the chassis cutouts and rotate the
left end down inside the left chassis wall.
3 Close the system. See "Closing the System."
4 Reconnect the system to the electrical outlet and turn on the system and
attached peripherals.
1
lift handles
2
alignment tabs
3
processors
1
2
3
Advertising