Dell DX6004S - Manual (Page 56)

56 Using the System Setup Program and UEFI Boot Manager
SATA Settings Screen
Virtualization Technology
(Disabled default)
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE: Disable this feature if your system will not be
running virtualization software.
Execute Disable
(Enabled default)
Enables or disables Execute Disable Memory Protection
Technology.
Number of Cores per
Processor
(All default)
If set to All, the maximum number of cores in each
processor is enabled.
Turbo Mode
(Enabled default)
If Turbo Boost technology is supported by the processor,
enables or disables Turbo Mode.
C States
(Enabled default)
When set to Enabled, the processor can operate in all
available power states.
Processor X ID Displays the family, model, level 2 cache size, level 3
cache size, and number of cores of the processor.
Option Description
SATA Controller
(ATA default)
Allows the embedded SATA to be set to Off, ATA, or
RAID modes.
NOTE: The UEFI support is disabled if SATA is set to the
RAID mode.
Port A
(Auto default)
Auto enables BIOS support for the device attached to
SATA port A. Off disables BIOS support for the device.
Port B
(Off default)
Auto enables BIOS support for the device attached to
SATA port B. Off disables BIOS support for the device.
Port C
(Off default)
Auto enables BIOS support for the device attached to
SATA port C. Off disables BIOS support for the device.
Port D
(Off default)
Auto enables BIOS support for the device attached to
SATA port D. Off disables BIOS support for the device.
Port E
(Auto default)
Auto enables BIOS support for the device attached to
SATA port E. Off disables BIOS support for the device.
Option Description
book.book.book Page 56 Tuesday, September 7, 2010 8:45 PM