Dell B3465dnf Mono Laser Multifunction Printer - Manual (Page 186)

Print Settings
Copies
1–999
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Paper Source
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Stack the pages of a print job in sequence when printing multiple copies.
Note: “(1,2,3) (1,2,3)” is the factory default setting.
Sides (Duplex)
1 sided
2 sided
Specify whether prints are on one side or on both sides of the page.
Note: “1 sided” is the factory default setting.
Staple
Off
On
Specify whether prints are stapled.
Notes:
• Off is the factory default setting.
• This menu appears only when a staple finisher is installed.
Duplex Binding
Long Edge
Short Edge
Define binding for duplexed pages in relation to page orientation.
Notes:
• Long Edge assumes binding along the long edge of the page (left edge for portrait and top
edge for landscape).
• Short Edge assumes binding along the short edge of the page (top edge for portrait and
left edge for landscape).
Paper Saver
Off
2
‑Up
3
‑Up
4
‑Up
6
‑Up
9
‑Up
12
‑Up
16
‑Up
Specify that multiple
‑page images be printed on one side of a paper.
Notes:
• Off is the factory default setting.
• The number selected is the number of page images that will print per side.
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specify the positioning of multiple
‑page images.
Notes:
• Horizontal is the factory default setting.
• Positioning depends on the number of page images and whether they are in portrait or
landscape orientation.
Understanding the printer menus 186