Insufficient memory to collate job [37 – Dell B3465dnf Mono Laser Multifunction Printer User Manual
Page 245
Insufficient memory to collate job [37]
Try one or more of the following:
•
From the printer control panel, touch Continue to print the part of the job already stored and begin collating the
rest of the print job.
•
Cancel the current print job.
Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
•
From the printer control panel, touch Continue to stop the defragmentation and continue printing.
•
Delete fonts, macros, and other data in the printer memory.
•
Install additional printer memory.
Insufficient memory, some Held Jobs were deleted [37]
From the printer control panel, touch Continue to clear the message.
Insufficient memory, some held jobs will not be restored [37]
Try one or more of the following:
•
From the printer control panel, touch Continue to clear the message.
•
Delete other held jobs to free up additional printer memory.
Insufficient memory to support Resource Save feature [35]
Install additional printer memory or touch Continue to disable Resource Save, clear the message, and continue printing.
Load [paper source] with [custom type name] [paper orientation]
Try one or more of the following:
•
Load the tray or feeder with the correct size and type of paper.
•
To use the tray with the correct paper size or type, touch Finished loading paper on the printer control panel.
Note: If the printer detects a tray that has the correct paper size and type, then it feeds from that tray. If the
printer cannot detect a tray that has the correct paper size and type, then it prints from the default paper
source.
•
Cancel the current job.
Troubleshooting
245