Dell PowerVault MD3000i - Manual (Page 11)

About Your System
11
Modular Disk Storage Manager
The Modular Disk (MD) Storage Manager software is a graphic interface with
wizard-guided tools and a task-based management structure designed to
reduce the complexity of installation, configuration, management, and
diagnostic tasks. MD Storage Manager can be used on any host server
attached to the storage array, as well as on storage management stations
connected to the same subnetwork as the RAID enclosure, to create and
manage multiple storage arrays.
NOTE:
The MD Storage Manager uses TCP/UDP port 2463 for discovery and
management of the MD3000i storage array.
For more information, see the MD Storage Manager User's Guide.
Other Information You May Need
CAUTION:
The Product Information Guide provides important safety and
regulatory information. Warranty information may be included within this
document or as a separate document.
• The Rack Installation Guide or Rack Installation Instructions included
with your rack solution describes how to install your enclosure into a rack.
• Getting Started With Your System provides an overview of enclosure
features, setting up your enclosure, and technical specifications.
• Setting Up Your PowerVault MD3000i provides an overview of setting up
and cabling your storage array.
• The PowerVault MD3000i Installation Guide provides installation and
configuration instructions for both software and hardware.
• The PowerVault MD Storage Manager CLI Guide provides information
about using the command line interface (CLI).
• The Dell PowerVault MD3000i Resource CD provides documentation for
configuration and management tools, as well as the full documentation
set.
• Dell PowerVault MD1000 Documentation is available at support.dell.com
for users who incorporate MD1000 expansion enclosures.
• Dell PowerEdge Cluster Documentation is available at support.dell.com.
A link to clustering documentation is also included on the Resource CD
under Product Documentation.