Dell PowerVault MD3000i - Manual (Page 12)

12
About Your System
• Updates are sometimes included to describe changes to the enclosure,
software, and/or documentation.
NOTE:
Always check for updates on support.dell.com and read the updates
first because they often supersede information in other documents.
• Release notes or readme files are included to provide last-minute updates
to the enclosure or documentation or advanced technical reference
material intended for experienced users or technicians.
Connection Components
Before connecting your RAID enclosure, ensure that the following are
available:
• The components that shipped with your RAID enclosure, including:
– Power cords (2)
– MD3000i Resource CD
– Setting Up Your PowerVault MD3000i
– Rail kit
• Any relevant documentation, including:
– Getting Started With Your System
– Rack Installation Guide or Rack Installation Instructions
– Product Information Guide (for important safety, regulatory, and
warranty information)
– Readme files
• #2 Phillips screwdriver
About the Enclosure Connections
The RAID enclosure is connected to a host server via two RAID controller
modules. The RAID controller modules are identified as RAID controller
module 0 and RAID controller module 1 (see Figure 1-4).
Each RAID controller module has two iSCSI In port connectors that provide
connection to the host server. The iSCSI In port connectors are labeled 0
and 1.