Dell PowerVault MD3000i - Manual (Page 73)

Troubleshooting Your Enclosure
73
Troubleshooting a Damaged Enclosure
Problem
• Enclosure was dropped or damaged.
Action
CAUTION:
Only trained service technicians are authorized to remove the
enclosure cover and access any of the components inside the enclosure. Before
performing any procedure, see your Product Information Guide for complete
information about safety precautions, working inside the enclosure and protecting
against electrostatic discharge.
1 Ensure that the following components are present, not broken, and
properly installed:
• All physical disks (both in their carriers and connected to the
enclosure midplane)
• Power supply/cooling fan modules
• RAID controller modules
• Enclosure midplane
2 Ensure that all cables are properly connected and that there are no bent
pins in the connector.
If problems are encountered, see "Getting Help" on page 81.
Troubleshooting Power Supplies
Problem
• Enclosure-status indicators show a problem.
• Power-supply fault indicators are lit.