Dell PowerVault MD3000i - Manual (Page 65)

Installing Enclosure Components
65
Figure 3-6. Replacing the Power Supply
CAUTION:
The power supply/cooling fan modules are heavy. Use both hands
when removing.
3 Grasp the handle on the power supply and carefully pull the module out of
the bay (see Figure 3-6).
NOTICE:
The power-supply handle is provided to ease the task of pulling the
module from the bay. Do not use this handle to carry the module.
Installing a Power Supply/Cooling Fan Module
1 Carefully slide the new power supply/cooling fan module approximately
two-thirds of the way into the empty bay.
1 power supply 2 captive screws (2) 3 handle
4 on/off switch
2
1
3
4