Removing memory module(s) – Dell Alienware Area 51 (Late 2009) User Manual
Page 26
026
026
/
CHAPTER 5: MEMORY MODULE(S)
Removing Memory Module(s)
Follow the instructions in “Before You Begin” on page
1.
Lift the release panel and open the left side-panel.
2.
Locate the memory-module connectors on the system board (see “System
3.
Board Connectors“ on page 11).
CAUTION: The memory module(s) may become very hot during normal
operation. Allow the memory module(s) to cool before touching them.
NOTE: For better access to the memory module(s), remove the graphics
card if the card is full length (see “Removing PCI and PCI Express Cards”
.
Press out the securing clip at each end of the memory-module connector.
4.
Lift the memory module off the memory-module connector. If the memory
5.
module is difficult to remove, gently ease the memory module back and
forth to remove it from the memory-module connector.
1
2
1
memory-module connector
2
securing clips (2)