Dell Alienware Area 51 (Late 2009) - Manual (Page 98)

098
098
/
CHAPTER 19: SYSTEM SETUP
Power Management Setup
Suspend Mode
Sets the energy-saving mode of the
ACPI function.
AC Recovery
Sets what action the computer takes
when power is restored.
Remote Wakeup
Sets the system to wake up from an
onboard LAN, PCIE-X1 LAN card, or a
PCI LAN card.
Auto Power On
Allows the computer to start up at a
certain time.
Frequency/Voltage Control
CPU Speed
Displays the current processor speed.
Memory Speed
Displays the current memory speed.
Current QPI Speed
Displays current QPI Speed.
QPI Frequency
Allows you to change the QPI
frequency.
Memory Ratio
Allows you to change the memory
ratio.
Integrated Devices
USB Functions
Allows you to enable or disable the
integrated USB controller.
HD Audio Controller
Allows you to enable or disable the
integrated audio controller.
Onboard IEEE1394 Controller Allows you to enable or disable the
onboard IEEE1394 controller.
LAN1 BCM5784 Device
Allows you to enable or disable the
onboard LAN1 controller.
LAN1 Option ROM
Allows you to enable or disable the
network controller’s boot option.
LAN2 BCM5784 Device
Allows you to enable or disable the
onboard LAN2 controller.
LAN2 Option ROM
Allows you to enable or disable the
network controller’s boot option.
JMicron 363 ATA Controller
Allows you to enable or disable the
onboard ATA controller.
SiL3132 E-Sata Device
Allows you to enable and disable the
e-SATA controller.
Configure SATA#1-6 as
Allows you to configure the integrated
hard drive controller to AHCI or RAID.
AHCI CD/DVD Boot Time out
Allows you to set the wait time for
SATA or CD/DVD in AHCI mode.