Replacing the top i/o panel – Dell Alienware Area 51 (Late 2009) User Manual
Page 61
061
061
/
CHAPTER 11: TOP I/O PANEL
Replacing the Top I/O Panel
Follow the instructions in “Before You Begin” on page
1.
Replace the top I/O panel on the chassis.
2.
Replace the four screws that secure the top I/O panel to the chassis.
3.
Route the top I/O panel cables through their routing guides and connect the
4.
cables to the system board connectors.
Replace the active-venting assembly (see “Replacing the Active-Venting
5.
Assembly” on page 56).
Replace the hard-drive shroud on the chassis.
6.
Replace the ten screws that secure the hard-drive shroud to the chassis.
7.
Replace the front bezel (see “Replacing the Front Bezel” on page
8.
46).
Replace the right side-panel (see “Replacing the Right Side-Panel” on
9.
page 16).
Replace the left side-panel (see “Replacing the Left Side-Panel” on page
10.
Connect your computer and devices to electrical outlets, and then turn
11.
them on.