Removing the master i/o board – Dell Alienware Area 51 (Late 2009) User Manual
Page 77
077
077
/
CHAPTER 15: MASTER I/O BOARD
2
1
1 master I/O board tray
2 screw
Removing the Master I/O Board
Follow the instructions in “Before You Begin” on page
1.
Remove the left side-panel (see “Removing the Left Side-Panel” on page
2.
Remove the PCI shroud (see “Removing the PCI Shroud“ on page
3.
22).
Disconnect all cables from the master I/O board. Note the routing of all
4.
cables as you remove them so that you can re-route them correctly after
installing the new master I/O board.
Remove the screw that secures the master I/O board tray to the chassis.
5.
Lift the master I/O board tray up and out of the chassis.
6.
NOTE: Do not remove the master I/O board from the master I/O board
tray. The master I/O board tray is shipped together with the replacement
master I/O board.