Dell PowerEdge 6850 - Manual (Page 44)

5. Reconnect the system to the electrical outlet, and turn on the system.
6. To replace the optional bezel, hook the right end of the bezel onto the chassis, then fit the free end of the bezel onto the system. Secure the bezel with
the keylock. See
Figure 5 -2 .
Troubleshooting a Wet System
Problem
l Liquid spilled on the system.
l Excessive humidity.
Action
1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2. Open the system. See " Opening the System ."
3. Remove all expansion cards installed in the system. See " Removing an Expansion Card " in "Installing System Components."
4. Remove all memory riser cards and memory modules installed in the system. See " Removing Memory Modules " in "Installing System Components."
5. Remove the processor(s) from the system. See " Removing a Processor " in "Installing System Components."
6. Let the system dry thoroughly for at least 24 hours.
7. Replace the processor(s), memory modules and memory riser cards, and expansion cards. See " Removing a Processor ," " Installing Memory Modules ,"
and " Installing an Expansion Card " in "Installing System Components."
8. Close the system. See " Closing the System ."
9. Reconnect the system to the electrical outlet, and turn on the system and peripherals.
If the system does not start properly, see " Getting Help ."
10. Run the appropriate online diagnostic test. See " Using Server Administrator Diagnostics " in "Running the System Diagnostics."
If the tests fail, see " Getting Help ."
Troubleshooting a Damaged System
Problem
l System was dropped or damaged.
Action
1. Open the system. See " Opening the System ."
2. Ensure that the following components are properly installed:
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.