Dell PowerEdge 6850 User Manual
Page 6
Advertising
10.
Remove the expansion cards from expansion slots 6 and 7, if installed. See "
Expansion Cards
" in "Installing System Components."
11.
Reinstall the password jumper plug on pins 1 and 2 to enable the password protection feature.
12.
Replace the expansion cards in expansion slots 6 and 7, if removed. See "
Expansion Cards
" in "Installing System Components."
13.
Close the system, reconnect the system to the electrical outlet, and turn on the system.
14.
Assign a new system and/or setup password.
To assign a new password using the System Setup program, see "Using the System Setup Program" in your User's Guide.
Back to Contents Page
Advertising