Table 11, Table 12, Table 13 – Dell POWEREDGE M1000E User Manual
Page 119
Web Tools Administrator’s Guide
91
53-1002756-01
Performance Monitor overview
7
lists each graph and indicates the supported port types for each graph. The port selection
columns for each graph displays the supported ports.
TABLE 11
Basic performance graphs
Graph type
Display description
Port Throughput
The performance of a port, in bytes per second, for frames received and
transmitted.
Switch Aggregate Throughput
The aggregate performance of all ports on a switch.
Blade Aggregate Throughput
The aggregate performance of all ports on a port card. This graph is
available only for the Brocade DCX and DCX-4S enterprise-class platforms.
Switch Throughput Utilization
The port throughput, in Gbps at the time the sample is taken. For the
Brocade DCX and DCX-4S enterprise-class platforms, this graph displays the
throughput for each slot. You can customize this graph to display
information for particular ports.
Port Error
CRC errors for a given port.
Switch Percent Utilization
The percentage utilization for each port in a switch. For the Brocade DCX,
this graph displays the percent utilization for each slot. You can customize
this graph to display information for particular ports.
Port Snapshot Error
The CRC error count between sampling periods for all the ports on a switch.
For the Brocade DCX and DCX-4S enterprise-class platforms, this graph
displays the CRC error rate for each slot. You can customize this graph to
display information for particular ports.
TABLE 12
Advanced performance monitoring graphs
Graph type
Display description
SID/DID Performance
The traffic between the SID-DID pair on the switch being managed. The
member selection list in the LHS displays the port in the current switch only.
The All Devices tab lists all the devices in the fabric. SID/DID Performance
can be used to select the source and destination. For more information,
refer to
“Creating SID-DID Performance graphs”
SCSI vs. IP Traffic
The percentage of SCSI versus IP frame traffic on each individual port. For
more information, refer to
“Creating the SCSI vs. IP Traffic graph”
SCSI Commands by port and LUN
(R, W, R/W)
The total number of read/write commands on a given port to a specific LUN.
For more information, refer to
“Creating SCSI command graphs”
TABLE 13
Supported port types for Brocade switches
Graph type
Physical FC ports
Logical FC ports
GbE ports
Port Throughput
P
P
P
Switch Aggregate
Throughput
N/A
N/A
N/A
Blade Aggregate
Throughput
1
N/A
N/A
N/A
Switch Throughput
Utilization
P
N/A
P
Port Error
P
P
P