Creating zone configurations, Adding or removing zone configuration members – Dell POWEREDGE M1000E User Manual
Page 144
116
Web Tools Administrator’s Guide
53-1002756-01
Zone configuration and zoning database management
8
Creating zone configurations
To create a zone configuration, perform the following steps. After creating a zone configuration, you
must explicitly enable it for it to take effect.
For information on enabling the configuration, refer to
“Enabling zone configurations”
NOTE
Any changes made to the currently enabled configuration does not display until you re-enable the
configuration.
To create zone configurations, perform the following steps.
1. Open the Zone Administration window as described in
“Opening the Zone Admin window”
2. Select a format to display zoning members in the Member Selection List as described in
3. Select the Zone Config tab and click New Zone Config.
4. In the Create New Config dialog box, enter a name for the new configuration and click OK.
The new configuration displays in the Name list.
5. Expand the Member Selection List to view the nested elements.
The choices available in the list depend on the selection made in the View menu.
6. Select an element in the Member Selection List that you want to include in your configuration.
The right arrow becomes active.
7. Click the right arrow to add configuration members.
Selected members are moved to the Config Members window.
8. Repeat steps 6 and 7 to add more elements to your configuration.
9. Select Zoning Actions > Save Config to save the configuration changes.
Adding or removing zone configuration members
For information on enabling the configuration, refer to
“Enabling zone configurations”
To add or remove members of a zone configuration, perform the following steps.
NOTE
You can make changes to a configuration that is currently enabled; however, changes do not display
until you re-enable the configuration.
To configure the zone members, perform the following steps.
1. Open the Zone Administration window as described in
“Opening the Zone Admin window”
2. Select the Zone Config tab.
3. Select the configuration you want to modify from the Name list.
4. Click an element in the Member Selection list that you want to include in your configuration or
select the element in the Config Members list that you want to delete.