Adding and removing members of a zone alias – Dell POWEREDGE M1000E User Manual
Page 138
110
Web Tools Administrator’s Guide
53-1002756-01
Zoning management
8
1. Open the Zone Administration window as described in
“Opening the Zone Admin window”
2. Select a format to display zoning members in the Member Selection List as described in
3. Select the Alias tab and click New Alias.
The Create New Alias dialog box displays.
4. In the Create New Alias dialog box, enter a name for the new alias and click OK.
The new alias displays in the Name list.
5. Expand the Member Selection List to view the nested elements.
The choices available in the Member Selection List depend on the selection in the View menu.
6. Click elements in the Member Selection List that you want to include in the alias. The right
arrow becomes active.
7. Click the right arrow to add alias members.
Selected members move to the Alias Members window.
8. Optional: Repeat steps 6 and 7 to add more elements to the alias.
9. Optional: Click Add Other to include a WWN or port that is not currently a part of the fabric.
10. Select Actions > Save Config to save the configuration changes.
Adding and removing members of a zone alias
For more information on enabling the configuration, refer to
“Enabling zone configurations”
NOTE
When you assign a node WWN to an alias or zone, all of the WWPN’s associated to that Node are
also moved. This functionality is supported only for IM0 mode. This behavior is duplicated in Brocade
Network Assistant zoning. This functionality is supported only by selecting the node WWN and
assigning it to the alias or zone.
To add or remove zone alias members, perform the following steps.
1. Open the Zone Administration window as described in
“Opening the Zone Admin window”
2. Select the Alias tab.
3. Select the alias you want to modify from the Name list.
4. Select an element in the Member Selection List that you want to add to the alias, or select an
element in the Alias Members list that you want to remove.
5. Click the right arrow to add the selected alias member, or click the left arrow to remove the
selected alias member.
The alias is modified in the Zone Admin buffer.
6. Select Zoning Actions > Save Config to save your configuration changes.