Dell POWEREDGE M1000E - Manual (Page 24)

xxiv Web Tools Administrator’s Guide
53-1002756-01
• Switching between virtual fabrics
• TACACS+ management
• Setting a principal switch
• Switch Status Policy changes
• Forward Error Correction
• Port Admin button grouping
• Updated 'Setting a shared secret key pair' section to include HBA
• Removed support for admin domain
• Addition of PCS block error to the Advanced tab of Port Statistics
• Drop of Interopmode 1: Open mode, Interopmode 2: McData Fabric mode, and Interopmode 3:
McData Fabric legacy mode for Ex-Ports
• User configured table column alignment is retained during auto or manual refresh and while
moving between the tabs
• Addition of a row to display Power on Time in SFP tab
• Support for Device Based Routing
• Addition of sub type to Fabric tree tool tip and XISL display enhacements.
For further information, refer to the release notes.
Document conventions
This section describes text formatting conventions and important notice formats used in this
document.
Text formatting
The narrative-text formatting conventions that are used are:
bold text Identifies command names
Identifies the names of user-manipulated GUI elements
Identifies keywords and operands
Identifies text to enter at the GUI or CLI
italic text Provides emphasis
Identifies variables
Identifies paths and Internet addresses
Identifies document titles
code text Identifies CLI output
Identifies command syntax examples
For readability, command names in the narrative portions of this guide are presented in mixed
lettercase: for example, switchShow. In actual examples, command lettercase is often all
lowercase. Otherwise, this manual specifically notes those cases in which a command is case
sensitive.