Dell PowerEdge 650 - Manual (Page 61)

Installing the CD and Diskette Drives
1. Align the diskette drive's mounting holes with the retaining pins on the drive tray. See Figure 7 -4 .
If the diskette drive is replaced, connect the interface cable from the interposer card to the new diskette drive.
2. Align the CD drive's mounting holes with the retaining pins on the drive tray. See Figure 7 -4 .
3. Rotate the drive tray's securing lever until it snaps into place.
4. Connect the interposer card to the CD drive.
Ensure that the fastener barrels are inserted through the interposer card and the tabs on the drive tray.
5. Insert the plungers into the fastener barrels until they snap into place.
6. Install the CD/diskette-drive tray. See " Installing the CD/Diskette Drive Tray ."
Back to Contents Page