Dell B5465dnf Mono Laser Printer MFP User Manual
Page 176
Use
To
ADF Loaded Beep
Enabled
Disabled
Specify whether the ADF sounds a beep when paper is loaded.
Note: Enabled is the factory default setting.
ADF Multi
‑feed Sensor
On
Off
Detect when the ADF picks more than one sheet of paper at once.
Note: On is the factory default setting.
Quiet Mode
Off
On
Reduce the amount of noise produced by the printer.
Notes:
•
Off is the factory default setting. This setting supports the
performance specifications for your printer.
•
On configures the printer to produce as little noise as
possible. This setting is best suited for printing text and line
art.
•
For optimal printing of color
‑rich documents, set Quiet Mode
to Off.
•
Selecting Photo from the print driver may disable Quiet
Mode and provide better print quality and full speed
printing.
Run Initial setup
Yes
No
Set the printer to run the setup wizard.
Note: Yes is the default setting. After completing the setup
wizard, the default becomes No.
Understanding the printer menus
176