Adjusting sleep mode – Dell B5465dnf Mono Laser Printer MFP User Manual

Page 225

Advertising
background image

Use

To

On

Reduce printer noise.

Notes:

Print jobs are processed at a reduced speed.

Printer engine motors do not start until a document
is ready to print. There will be a short delay before
the first page is printed.

Off

Use factory default settings.

Note: This setting supports the performance
specifications of the printer.

3

Click Submit.

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode.

Select from 1 to 120 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1

Open a Web browser, and then type the printer IP address in the address field.

Notes:

View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2

Click Settings > General Settings > Timeouts.

3

In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.

4

Click Submit.

Using the printer control panel

1

From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2

In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode,
and then touch Submit.

Saving money and the environment

225

Advertising