Erasing non-volatile memory, Erasing printer hard disk memory, Erasing non – Dell B5465dnf Mono Laser Printer MFP User Manual
Page 229: Volatile memory
Erasing non
‑volatile memory
Erase individual settings, device and network settings, security settings, and embedded solutions by following these
steps:
1
Turn off the printer.
2
Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar
appears.
The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully
turned on, a list of functions appears on the printer display, instead of the standard home screen icons.
3
Touch Wipe All Settings.
The printer restarts several times during this process.
Note: Wipe All Settings securely removes device settings, solutions, jobs, and passwords from the printer
memory.
4
Touch Back > Exit Config Menu.
The printer will perform a power
‑on reset, and then return to normal operating mode.
Erasing printer hard disk memory
Notes:
•
Some printer models may not have a printer hard disk installed.
•
Configuring Erase Temporary Data Files in the printer menus lets you remove residual confidential material left
by print jobs by securely overwriting files that have been marked for deletion.
Using the printer control panel
1
Turn off the printer.
2
Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar
appears.
The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully
turned on, the touch screen displays a list of functions.
3
Touch Wipe Disk, and then touch one of the following:
•
Wipe disk (fast)—This lets you overwrite the disk with all zeroes in a single pass.
•
Wipe disk (secure)—This lets you overwrite the disk with random bit patterns several times, followed by a
verification pass. A secure overwrite is compliant with the DoD 5220.22
‑M standard for securely erasing data
from a hard disk. Highly confidential information should be wiped using this method.
4
Touch Yes to proceed with disk wiping.
Notes:
•
A status bar will indicate the progress of the disk wiping task.
•
Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable
for other user tasks.
5
Touch Back > Exit Config Menu.
Securing the printer
229