Dell B5465dnf Mono Laser Printer MFP - Manual (Page 269)

• From the printer control panel, touch Continue to clear the message and print using a different tray.
• Cancel the print job.
Insert Tray [x]
Try one or more of the following:
• Insert the specified tray into the printer.
• Cancel the print job.
• Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.
Install duplex
Try one or more of the following:
• Install the duplex unit:
1 Turn off the printer.
2 Unplug the power cord from the electrical outlet.
3 Install the duplex unit.
4 Connect the power cord to a properly grounded electrical outlet.
5 Restart the printer.
• Cancel the current job.
• Reset the active bin.
Install Tray [x]
Try one or more of the following:
• Install the specified tray:
1 Turn off the printer.
2 Unplug the power cord from the electrical outlet.
3 Install the specified tray.
4 Connect the power cord to a properly grounded electrical outlet.
5 Turn the printer back on.
• Cancel the print job.
• Reset the active bin.
Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
• From the printer control panel, touch Continue to stop the defragmentation and continue printing.
• Delete fonts, macros, and other data in the printer memory.
• Install additional printer memory.
Troubleshooting 269