Dell C2665dnf Color Laser Printer - Manual (Page 173)

Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame.
NOTE: To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
NOTE: You can set the password for access to Admin Settings from Panel Lock in Printer Settings.
Values:
Administrator Password Sets the password using up to 128 alphanumeric characters.
Re-enter Administrator Password Confirms the set password.
Access denial by the authentication Sets the amount of time the administrator should wait for the access to the printer
failure of the Administrator setup from Dell Printer Configuration Web Tool. Sets the time period from 5 to 255
seconds. The access is denied if the time-out time is exceeded. If you set 0, this mode
is disabled.
Authentication System
Purpose:
To specify the server authentication type, the server response time-out, or the search time-out.
Values:
Authentication Type
(for Server Address/
Phone Book)
Authentication System
Settings
Select the authentication system from the list.
Optional Information Server Response Time-
Out
Sets the amount of time the printer should wait for response from the
server. Sets the time period from 1 to 75 seconds.
Search Time-Out Sets the amount of time the printer should wait for searching for the server.
Sets the time period from 5 to 120 seconds.
Kerberos Server
Purpose:
To specify the settings for the Kerberos server.
Values:
Kerberos Server (for
Server Address/Phone
Book)
IP Address / Host Name
& Port
Domain Name
Sets the IP address or host name, and the port address. The port address
must be 88 or between 5,000 and 65,535.
Enter the domain name.
Login Name Enter the login name.
Password Enter the login password.
Re-enter Password Enter the login password again to confirm it.
Dell™ Printer Configuration Web Tool 171