Dell C2665dnf Color Laser Printer - Manual (Page 332)

Sharpness
To adjust the sharpness to make the copy image sharper or softer than the original:
1 Swipe the screen until Sharpness appears, and then tap Sharpness.
2 Tap the desired setting.
Sharpen Makes the copy image sharper than the original.
Normal* The color clarity of the image is the same as the original.
Soften Makes the copy image softer than the original.
* Denotes the factory default setting.
Reduce / Enlarge
To reduce or enlarge the size of a copied image from 25 to 400 percent when you copy original documents from the
document glass or DADF:
NOTE: When you make a reduced copy, black lines may appear at the bottom of your copy.
1 Swipe the screen until Reduce/Enlarge appears, and then tap Reduce/Enlarge.
2 Tap the desired setting, and then tap OK.
(Inch series)
100%*
50%
64% (Ledger→Letter)
78% (Legal→Letter)
129% (Statement→Letter)
154% (Statement→Legal)
200%
(mm series)
100%*
50%
70% (A4→A5)
81% (B5→A5)
122% (A5→B5)
141% (A5→A4)
200%
* Denotes the factory default setting.
NOTE: You can also specify the value in increments of 1 percent from 25 to 400 by tapping – or +.
Copying 330