Dell C2665dnf Color Laser Printer User Manual

Page 254

Advertising
background image

Color Regi Chart

Print

Prints a color registration chart. The color registration chart

prints a lattice pattern of yellow, magenta, and cyan lines.

On the chart, find the values on the right side that are next

to the line that is perfectly straight for each of the three

colors. If the value for this line is 0, color registration

adjustment is not required. If the value for this line is any

value other than 0, specify the adjustment values under

lateral adjustment and process adjustment in

Enter

Number

.

Enter Number

LY
LM
LC
RY
RM

Available Range:

-9 to +9

Available Range:

-9 to +9

Sets lateral (perpendicular to paper feed direction) and

process (paper feed direction) color adjustment values

individually for Yellow, Magenta, and Cyan. Enter a number

in order of lateral adjustment (left), lateral adjustment

(right), and process adjustment. Select

OK

to save all the

settings.

RC
PY
PM

Available Range:

-9 to +9

PC

NOTE:

Ensure that you remove the paper from the single sheet feeder before performing

Auto Correct

.

Reset Defaults

Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu

parameters are reset to their default values.
Values:

User Fax Section

Initialize Initializes the fax number entries in the Address Book.

User Scan Section

Initialize Initializes the e-mail and server address entries in the Address Book.

User Account Section

Initialize Initializes the user registration information.

System Section

Initialize Initializes the system parameters.

Initialize Print Meter

Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.

Reset Fusing Unit

Purpose:
To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter.

Reset Transfer Belt Unit

Purpose:
To initialize the life counter of the transfer belt unit. After replacing the transfer belt unit, be sure to initialize its life

counter.

Understanding the Printer Menus

252

Advertising