Dell C2665dnf Color Laser Printer - Manual (Page 57)

Operator Panel
Auto SSID Setup
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Tap Network.
4 Tap Wireless.
5 Tap Wireless Setup Wizard.
The printer automatically searches the access points on wireless network.
6 Tap
until the desired access point appears, and then select the access point.
If the desired access point does not appear, go to "Manual SSID Setup."
NOTE: Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the router.
7 Tap Next.
8 Enter the WEP key or pass phrase.
When the encryption type of the selected access point is WEP in step 6:
a Tap the WEP Key text box, and then enter the WEP key.
b Tap OK.
When the encryption type of the selected access point is WPA, WPA2 or Mixed in step 6:
a Tap the Pass Phrase text box, and then enter the pass phrase.
b Tap OK.
9 The Restart System screen appears.
10 Turn off the printer, and turn it on again to apply the settings.
Wireless LAN connection setting is complete.
Manual SSID Setup
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Tap Network.
4 Tap Wireless.
5 Tap Wireless Setup Wizard.
6 Tap the Manual SSID Setup check box, and then tap Next.
7 Enter the SSID, and then tap Next.
8 Select the network mode from Infrastructure and Ad-hoc depending on your environment, and then tap
Next.
If you select Infrastructure, proceed to step 9.
If you select Ad-hoc, proceed to step 10.
Installing Optional Accessories 55