Dell C2665dnf Color Laser Printer - Manual (Page 253)

Adjust Fusing Unit
NOTE: The print quality changes depending on the setting values you select for this item.
Purpose:
To adjust the temperature setting of the fusing unit for each paper type.
Values:
Plain 0 * Sets the fusing unit temperature in increments of 1. The default
Plain Thick
Available Range: -3 to +3
0
*
settings may not give the best output on all paper types. When the
printed paper has curled, try to lower the temperature. When the toner
does not fuse on the paper properly, try to increase the temperature.
Available Range: -3 to +3
Covers 0 *
(106-163g/m 2 )
Available Range: -3 to +3
Covers Thick 0 *
(164-216g/m 2 )
Available Range: -3 to +3
Coated 0 *
(106-163g/m 2 )
Available Range: -3 to +3
Coated Thick 0 *
(164-216g/m 2 )
Available Range: -3 to +3
Label 0 *
Available Range: -3 to +3
Envelope 0 *
Available Range: -3 to +3
Recycled 0 *
Available Range: -3 to +3
Auto Reg Adjust
Purpose:
To specify whether to automatically perform color registration adjustment.
Values:
Off Does not automatically perform color registration adjustment .
On * Automatically performs color registration adjustment .
Color Reg Adjust
Purpose:
To manually perform color registration adjustment.
Manual Color Registration Adjustments are required when the printer is initially installed and after the printer is
moved.
NOTE: The Color Reg Adjust feature can be configured when Auto Reg Adjust is set to Off .
Values:
Auto Correct Start Automatically performs color registration correction.
Understanding the Printer Menus 251