Dell C2665dnf Color Laser Printer - Manual (Page 177)

802.1x
Purpose:
To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer.
Values:
Configure 802.1x Enable IEEE 802.1x Select the check box to enable IEEE 802.1x authentication.
Authentication Method EAP-MD5
EAP-MS­
CHAPv2
Selects the authentication method to use for IEEE
802.1x authentication.
PEAP/MS­
CHAPv2
Login Name: (Device
Name)
Sets the login name (device name) for IEEE 802.1x authentication using
up to 128 alphanumeric characters.
Password Sets the login password for IEEE 802.1x authentication using up to 128
alphanumeric characters.
Re-enter Password Confirms the set login password.
Certificate Validation Select the check box to enable Certificate Validation.
IP Filter (IPv4)
Purpose:
To specify the IP address and subnet mask to be permitted or denied access to the printer.
Values:
Access List Address Sets the IP addresses that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Address Mask Sets the subnet mask that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Active Mode Reject Rejects printing from specified network address.
Accept Permits printing from specified network address.
Off Disables the IP Filter feature for the specified IP address.
SMTP Domain Filtering
Purpose:
To specify whether to restrict sending e-mails to specific domains only.
NOTE: This feature does not restrict sending e-mails through the E-Mail Alert feature.
Values:
SMTP Domain Filtering Domain Filtering Select the check box to enable Domain Filtering.
Allow Domain List Allows you to register up to five domains allowed for sending e-mails.
Copy Printer Settings
The Copy Printer Settings menu includes the Copy Printer Settings and Copy Printer Settings Report pages.
Dell™ Printer Configuration Web Tool 175