Dell C2665dnf Color Laser Printer - Manual (Page 59)

8 Enter the SSID in the SSID text box.
9 Select Ad-Hoc or Infrastructure in the Network Type drop-down list box.
10 Select the encryption type from No Security, WEP, WPA-PSK-TKIP, WPA-PSK-AES/WEP2-PSK AES, and Mixed
Mode PSK in the Encryption drop-down list box, and then set each item for the encryption type selected.
NOTE: For details on each item, see "Dell™ Printer Configuration Web Tool."
11 Click Apply New Settings to apply the settings.
12 Turn off the printer, disconnect the Ethernet cable and turn it on again.
Wireless LAN connection setting is complete.
Reconfiguring the Wireless Setting
To change the wireless setting from your computer, perform the following.
NOTE: To change the wireless setting through wireless connection, ensure that the wireless connection setting is completed in
"Configuring the Optional Wireless Adapter."
Reconfiguring the Wireless Setting Using Dell Printer Configuration Web Tool
NOTE: The following settings are available when the network mode is set to infrastructure in "Configuring the Optional Wireless
Adapter."
1 Check the IP address of the printer.
a Press the
(Information) button.
b Tap About This MFP.
c Tap the Network tab.
d Tap
button until IP(v4) Address appears, and then check the IP address displayed in the IP(v4)
Address.
2 Launch the Dell Printer Configuration Web Tool by entering the IP address of the printer in your web browser.
Click Print Server Settings.
Installing Optional Accessories 57
3