Dell Brocade Adapters - Manual (Page 103)

Brocade Adapters Installation and Reference Manual 75
53-1002144-01
Using the Brocade Adapter Software Installer
3
FIGURE 16 Install Complete screen
12. Confirm that all software installed successfully. If the screen instructs you to restart or reboot
the system, select any options that apply.
13. Select Done.
14. Verify installation using tools available on your host system. Refer to “Confirming driver package
installation” on page 103 for details.
15. To make sure that the drivers and adapter boot code are synchronized, be sure to update your
adapter with the latest boot image from the Brocade website at www.brocade.com/adapters
whenever you install or update adapter driver packages . From the adapters website, navigate
to the drivers Downloads page. Access the appropriate download page by selecting your host’s
operating system from the Download Individual Software Installers, Drivers, or Documents list.
Refer to “Boot code updates” on page 118 for instructions to install the boot image.
NOTE
Installing management utilities on Windows systems creates a Brocade BCU shortcut on your
system desktop. Use this shortcut to launch the BCU> command prompt and enter BCU commands.