Dell Brocade Adapters User Manual
Page 85
Brocade Adapters Installation and Reference Manual
57
53-1002144-01
Stand-up adapters
2
8. Install the longer, standard bracket on the adapter if the low-profile mounting bracket (shipped
installed on adapter) does not fit your system case. Use the following steps. If the installed
low-profile bracket works, go on to
a. Remove all SFP transceivers from the adapter. Refer to
on page 59 for procedures.
b. Remove the two screws attaching the bracket to the adapter,
and pull off the bracket
. Refer
.
FIGURE 8
Removing or installing adapter mounting bracket
c. Carefully guide the new mounting bracket onto the adapter, making sure the bracket
mounting tabs align with the holes in the adapter.
d. Replace and tighten the two screws.
e. Store the mounting bracket that you removed for future use.
9. Insert the adapter into the desired empty PCIe bus slot. Press firmly until the adapter seats.
for seating directions.