Dell Brocade Adapters - Manual (Page 112)

84 Brocade Adapters Installation and Reference Manual
53-1002144-01
Using the Brocade Adapter Software Installer
3
For Linux and Solaris systems, perform the following steps.
a. Change to the directory where the Adapter Software Installer application is installed using
the following command:
cd <install directory>/UninstallBrocade Adapter Software <version>
where:
<install directory> - default install directory is /opt/brocade/adapter.
<version> - the application version, such as v3.0.
b. Enter the following command to launch the Brocade Adapter Software Installer:
sh Uninstall.sh
2. When an Introduction message displays about the uninstall, click Next.
3. If a message displays prompting you to close HCM, close the application if it is running, then
click OK on the message box.
4. When the Uninstall Options screen displays with uninstall options, select an option.
• Select Complete Uninstall to remove the driver packages and all other installed Brocade
adapter software components.
• Select Uninstall Specific Features to selectively uninstall specific software components.
5. Select Next.
• If you selected Complete Uninstall, a screen displays showing software removal progress.
• If you selected Uninstall Specific Features, a Choose Product Features screen displays
from which you can select features for removal. Remove check marks by features that you
wish to uninstall, then select Uninstall to continue with software removal.