Customizing the touch pad and track stick, Changing the track stick cap – Dell Latitude D630 ATG (Mid 2007) User Manual

Page 42

Advertising
background image

42

Using the Keyboard

• To move the cursor, lightly slide your finger over the touch pad.
• To select an object, lightly tap once on the surface of the touch pad or use your thumb to press the left

touch-pad button.

• To select and move (or drag) an object, position the cursor on the object and tap twice on the touch

pad. On the second tap, leave your finger on the touch pad and move the selected object by sliding

your finger over the surface.

• To double-click an object, position the cursor on the object and tap twice on the touch pad or use your

thumb to press the left touch-pad button twice.

You can also use the track stick to move the cursor. Press the track stick left, right, up, or down to change

the direction of the cursor on the display. Use the track stick and track stick buttons as you would use a

mouse.

Customizing the Touch Pad and Track Stick

You can use the Mouse Properties window to disable the touch pad and track stick or adjust their

settings.

1 Open the Control Panel, and then click Mouse. For information about the Control Panel, access the

Help and Support Center (click StartHelp and Support).

2 In the Mouse Properties window:

• Click the

Device Select tab to disable the touch pad and track stick.

• Click the

Touch Pad tab to adjust touch pad and track stick settings.

3 Click OK to save the settings and close the window.

Changing the Track Stick Cap

You can replace your track stick cap if it wears down from prolonged use. You can purchase additional

caps by visiting the Dell website at dell.com.

Advertising