Expresscard, Removing a card or blank – Dell Latitude D630 ATG (Mid 2007) User Manual

Page 67

Advertising
background image

Using Cards

67

ExpressCard

1 Place the ExpressCard in the adapter (the adapter is included with the ExpressCard).
2 Install the ExpressCard with adapter the same way as a PC Card (see "PC Cards" on page 65).

Removing a Card or Blank

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product

Information Guide.

NOTICE:

Click the

icon in the taskbar to select a card and stop it from functioning before you remove it from

the computer. If you do not stop the card in the configuration utility, you could lose data. Do not attempt to eject a

card by pulling its cable, if one is attached.

Press the latch and remove the card or blank. For some latches, you must press the latch twice: once to

pop the latch out, and then a second time to pop the card out.

Advertising