Dell UPS 10000R User Manual
Page 38
38
|
Configuring the Card
S
Safe power down & reboot: Immediately launches a sequence to switch off and then restore output
power. It shuts down the powered systems during the shutdown sequence, and then switches off
the output. Finally, it launches the restart sequence at the end of the time delay specified in the
Toggle duration parameter. The output status is updated.
S
Immediate On: Immediately launches a sequence to switch on output power . It re-powers the
output and starts the systems.
S
Delayed, safe power down: This is the same switch off sequence as for the Safe power down
command, but postponed by the number of seconds programmed in the Off Delay parameter.
S
Delayed, safe power down & reboot: This is the same switch off and then on sequence as for the
Safe power down & reboot command, but postponed by the number of seconds programmed in
the Off Delay parameter.
S
Delayed On: This is the same switch on sequence as for the Immediate On command, but
postponed by the number of seconds programmed in the On Delay parameter.
Selecting Save saves the Off Delay, Toggle duration, and On Delay parameters on the card.
NOTE:
For security purposes, the administrator must click Save and enter the admin user name and password
to save modifications or run commands. The default user name and password are both admin.