Dell UPS 10000R - Manual (Page 47)

47 Configuring the Card |
E-Mail Message Settings
Use the Email Message Settings page to customize the content of e-mail messages initiated by the card
(see “Email Notification” on page 45). See Figure 29.
Figure 29. Email Message Settings Page
Common settings for all e-mail message recipients follow:
S
Sender (59 characters maximum): Identifies the source of the message. The default value is
[email protected].
This field allows free text. However, depending on the SMTP server configuration, the server may
check that the domain name contained in the Sender address exists and that the user in the Sender
address belongs to this domain.
S
Subject: Identifies the subject of the e-mail message to be sent. Enter text and select from the
following optional check boxes to build the message subject:
- UPS Name specifies the name of the UPS.
- UPS Location displays the geographic location of the UPS (see “System Settings” on page 52).
- Event Message identifies the event generating the e-mail message.