Dell UPS 10000R - Manual (Page 6)

6 |
Introduction
Introduction
The Dell
t
Network Management Card works with Dell UPS Management Software to monitor,
manage, and protect uninterruptible power supplies (UPSs) through standard Web pages, Simple
Network Management Protocol (SNMP), and Secure Sockets Layer (SSL) security protocol. The Dell
Network Management Card can support up to five connected browsers at a time, or three with SSL
protocol.
You can configure the card with any one of the following options:
S
Web browser
S
Local serial link (network parameters)
S
Bootstrap Protocol/Dynamic Host Configuration Protocol (BOOTP/DHCP, network parameters)
In addition, the Dell Network Management Card has the following features:
S
Simultaneous monitoring of up to five connected browsers (three in SSL)
S
Configuration of automatic e-mail message in response to UPS alarms and to transmit periodic
reports
S
Control of UPS on/off switching with a Web browser
S
Adjustment and control of load segments through the Web interface, including sequential starting
of the installation and optimization of backup time by shutting down non-priority systems
S
Automatic date and time adjustment through an NTP server
S
Protection by encrypted password
S
Protection by secure SSL connection (enabled by default)
S
Recording of events and measurements in the non-volatile memory
S
Languages available:
- English
- French
- Spanish
- German
- Simplified Chinese
- Japanese
- Russian
- Korean
- Traditional Chinese
1