Notified applications – Dell UPS 10000R User Manual
Page 53
Advertising
53
Configuring the Card
|
S
Factory Reset button: Restores the default configuration of all the card's parameters.
S
Keep TCP/IP parameters: Select this option to maintain the IP address, subnet mask, gateway,
and BOOTP/DHCP value. To ensure security, this operation requires admin user name and
password. By default, user name and password are both admin.
Notified Applications
Use the Notified Applications page to modify a network management system (NMS) that is set to
receive notifications from the card or to add up to three NMSs to the notified applications.
To modify or add a new NMS:
1
Select Notified Applications from the menu bar. The Notified Applications page opens
(see Figure 33).
Figure 33. Notified Applications Page
Advertising